microSD Express explained: speeds, Switch 2 and compatibility
What microSD Express is, how fast it runs (up to 985 MB/s), how it differs from UHS-I and UHS-II, and why the Nintendo Switch 2 needs it.
microSD Express is a microSD card that talks to a device over the same PCIe and NVMe interface used by SSDs, instead of the older SD bus. Its interface tops out at 985 MB/s for the single-lane PCIe Gen 3 version, roughly ten times the ceiling of UHS-I, and the Nintendo Switch 2 needs it to run games from a memory card. An ordinary microSDXC card still works in many other devices, but not as game storage on the Switch 2.
What microSD Express is
Standard microSD cards, including UHS-I and UHS-II types, use the SD bus: a parallel-style interface with its own protocol. An Express card adds a second path. According to the SD Association white paper on SD Express Speed Class, these cards support PCIe and NVMe alongside the legacy UHS-I interface on the same card.
To the host, an Express card appears as a standard NVMe storage device. That is the same family of protocol a laptop uses for its internal SSD, shrunk into the microSD form factor. The SD Association now describes it as removable NVMe storage rather than simply the next memory card.
For background on the link itself, see our guide to PCIe generations and their speeds.
microSD Express speeds
The SD Association bus speed page lists SD Express interface speeds by PCIe configuration:
- 985 MB/s: PCIe Gen 3, one lane (introduced with the SD 7.x specifications).
- 1,970 MB/s: PCIe Gen 4 with one lane, or Gen 3 with two lanes (SD 8.0).
- About 3,940 MB/s: PCIe Gen 4 with two lanes (SD 8.0, full-size SD).
These are bus ceilings, not what a card delivers. Real card speed depends on the card itself and the host. A card on a Gen 3 x1 link cannot exceed 985 MB/s, and in practice flash performance, heat and the host decide how close it gets.
The SD Association says microSD cards under the SD 8.0 specification support only PCIe Gen 4 x1, so the dual-lane figures belong to full-size SD cards. For microSD, the ceilings are 985 MB/s (Gen 3 x1) and, for newer SD 8.0 cards, 1,970 MB/s (Gen 4 x1). Check each maker’s listing for the interface a specific card uses before buying.
How that compares with older microSD
The SD Association’s figures put UHS-I at up to 104 MB/s and UHS-II at up to 312 MB/s. Against UHS-I, the 985 MB/s Gen 3 x1 ceiling is close to ten times higher. UHS-II microSD cards are less common than UHS-I, so many buyers are comparing Express with UHS-I.
Speed classes on microSD Express cards
Printed speed ratings such as V30 or A2 describe the SD bus. The SD 9.1 specification added separate SD Express Speed Classes for the PCIe/NVMe path. The white paper defines four:
- Class 150: 150 MB/s minimum read/write performance.
- Class 300: 300 MB/s.
- Class 450: 450 MB/s.
- Class 600: 600 MB/s.
These are minimums guaranteed under defined conditions, and they apply only when both card and host use the PCIe path and follow the speed class rules. A card that supports one class must support all lower ones. The classes also cover recording of up to eight simultaneous streams, which matters for cameras more than for games.
A card without a printed class can still be an Express card. Look for the SD Express marking on the card and packaging, and check the maker’s specification sheet.
Is microSD Express backward compatible?
Yes, with a limit. The SD Association says Express cards also work through the SD interface, giving backward compatibility with existing UHS-I hosts. Put an Express card into a phone, camera or reader that only knows the SD bus and it should behave as a UHS-I card, so you get UHS-I speed, not PCIe speed.
The reverse does not work. A standard UHS-I or UHS-II microSD card has no PCIe contacts or controller, so a device that needs PCIe speeds cannot get them from it. That is why the same card can look like a bargain or a waste depending on the device it goes into.
Two practical checks follow:
- Confirm that your device lists microSD Express support, not just “microSD” or “microSDXC” support.
- If you use a USB card reader, confirm that the reader supports microSD Express. A UHS-I-only reader will read the card but at UHS-I speed.
microSD Express and the Nintendo Switch 2
The Switch 2 is the product that brought the format to a mass audience. Nintendo announced in April 2025 that the console supports only microSD Express cards, as summarised in Wikipedia’s SD card entry. Older microSDHC and microSDXC cards are limited to viewing screenshots and videos or transferring media from earlier Switch models, not to running Switch 2 games.
Some physical Switch 2 releases ship as game-key cards, which hold a licence and not the game data. The game files are downloaded to the console, so storage still matters. Details of what Nintendo supports, including maximum card capacity and compatible cards, are in Nintendo’s own support pages (start from Nintendo’s Switch 2 site) and are worth checking before a purchase because compatibility lists can change.
Retail pricing moves often, and the market for flash memory has been tight, as our piece on why SSD and hard drive prices are rising in 2026 explains. We do not list card prices here for that reason.
Which microSD Express card to look for
- Switch 2 or handheld gaming: any card that carries the microSD Express marking and that the console maker lists as supported. Capacity matters more than top speed here.
- Cameras, drones and recorders: check the device manual for the speed class it requires, such as an SD Express Speed Class, and match it.
- Phones, tablets and older devices: a regular UHS-I card is usually enough and costs less, since the device cannot use the PCIe path.
Cards from unknown sellers with implausible capacities are a separate risk, and speed ratings on the listing are not proof. Buy from the maker or an authorised retailer.
More explainers on memory and interfaces are in our Chips section, and gadget and console debuts are tracked under Launches.
Frequently asked questions
What is the difference between microSD Express and regular microSD?
Regular microSD cards use the SD bus, which tops out at 104 MB/s for UHS-I. microSD Express adds a PCIe and NVMe interface with a ceiling of 985 MB/s on a Gen 3 single-lane link.
Does the Switch 2 work with a normal microSD card?
Not for game storage. Nintendo said the console supports only microSD Express cards for expansion, and older cards are limited to viewing media and transferring data from earlier models.
Can I use a microSD Express card in a device that does not support it?
Usually yes. The card also supports the UHS-I interface, so a compatible older device should read it at UHS-I speed, not PCIe speed.
Is microSD Express faster than UHS-II?
On paper, yes. The 985 MB/s Gen 3 x1 ceiling is above the 312 MB/s UHS-II ceiling, though real results depend on the card and host.
How do I tell if a card is microSD Express?
Look for the SD Express marking on the card or packaging, and confirm the specification on the maker’s product page. Speed ratings like V30 or A2 alone do not show PCIe support.